Smart Home Automation Forum › Technical Support › KC868-HxB series Smart Controller v
KC868-32BS -ve/ground output

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
KC868-32BS -ve/ground output
udayansarma Offline
Junior Member
**
Posts: 9
Threads: 4
Joined: Feb 2022
Reputation: 0
#1
03-03-2022, 12:13 AM
I've about 15 shades operated by 12vdc board. Please take a look at the attached photo. The blue wires are the triggers for the different electric motors for the shades. When I connect the blue wires with 12VDC ground(-ve), the shade operates.  Is there a way to configure the H32BS to output ground/-ve 12vdc?

Thanks much


Attached Files Image(s)
   
Find
Reply
admin Offline
Administrator
*******
Posts: 4,985
Threads: 684
Joined: Oct 2020
Reputation: 132
#2
03-03-2022, 12:17 AM
when connect with GND or -12V will work? 0v or -12v?
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://kincony.aliexpress.com
Find
Reply
udayansarma Offline
Junior Member
**
Posts: 9
Threads: 4
Joined: Feb 2022
Reputation: 0
#3
03-03-2022, 12:18 AM (This post was last modified: 03-03-2022, 12:30 AM by udayansarma.)
(03-03-2022, 12:17 AM)admin Wrote: when connect with GND or -12V will work?  0v or -12v?

Ground, this is completely 12vDC no AC at all. By -ve I was referring to ground (or floating ground), please look at the attached diagram


Attached Files Image(s)
   
Find
Reply
admin Offline
Administrator
*******
Posts: 4,985
Threads: 684
Joined: Oct 2020
Reputation: 132
#4
03-03-2022, 12:23 AM
H32BS' MOSFET is output high level, if you want to output low level. you can let H32BS connect to KC868-E16, E16 relay's COM connect with Ground. when Turn ON relay, then output 0V.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://kincony.aliexpress.com
Find
Reply
udayansarma Offline
Junior Member
**
Posts: 9
Threads: 4
Joined: Feb 2022
Reputation: 0
#5
03-03-2022, 12:31 AM (This post was last modified: 03-03-2022, 01:02 AM by udayansarma.)
(03-03-2022, 12:23 AM)admin Wrote: H32BS' MOSFET is output high level, if you want to output low level. you can let H32BS connect to KC868-E16, E16 relay's COM connect with Ground. when Turn ON relay, then output 0V.

Got it. Thanks
(03-03-2022, 12:31 AM)udayansarma Wrote:
(03-03-2022, 12:23 AM)admin Wrote: H32BS' MOSFET is output high level, if you want to output low level. you can let H32BS connect to KC868-E16, E16 relay's COM connect with Ground. when Turn ON relay, then output 0V.

Got it. Thanks

Tried it with E16 relays and it all worked. Thanks much
Find
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)