【IoT training lesson beginners #04】How to let your infrared device become smart
We will produce a series of video tutorials using the IBM Node-Red DIY software. the Node-Red is open source.I find it’s very easy to use,almost not need write many program code.
We will produce a series of video tutorials using the IBM Node-Red DIY software. the Node-Red is open source. I find it’s very easy to use, almost not need write many program code.
We will produce a series of video tutorials using the IBM Node-Red DIY software
We will produce a series of video tutorials using the IBM Node-Red DIY software
Now KC868-D8 can easily integrate to home assistant by MQTT, use for 8 channel dimmer output. step-A. Make sure KC868-D8’s firmware version is >= V4.34. you can download new firmware from our technical support forum: https://www.kincony.com/forum step-B. open controller’s IP, set ethernet work mode = MQTT, set the MQTT server IP and port,Mqtt Broker username…
DetailsKC868-A8 smart controller, many hardware resources for you to use, you can write any code by Arduino IDE to ESP32 wifi/Bluetooth/ethernet module. We will supply demo codes for different samples. Everyone can modify and change the code for their own smart home automation system project.
how to DIY home automation by home assistant guide: 1: how to install home assistant on raspberry pi4 linux system. 2. install node-red on home assistant raspberry pi4 3. make phone application button to control light relay switch 4. how to install wall switch and wireless remoter on home assistant 5. how to use input…
Details