mqtt input module

KC868-COLB NEW FIRMWARE SUPPORT ETHERNET FOR MQTT

improvement: 1. KC868-COLB default set “enable” for auto upload function, before version default is “disable”. 2. Fixed problem that if have a DS18B20 temperature value auto loaded, other temperature sensors will stop upload, until temperature value changed will auto upload again. Now all DS18B20 temperature sensor will all auto upload. 3. Support use MQTT function…

home assistant

KC868-COLB input module integrate home assistant by MQTT

Now KC868-COLB MQTT input module can easily integrate to home assistant by MQTT, use for 16 channel digital input + 16 channel analog input + 5 channel DS18B20 temperature sensor. A. make sure KC868-COLB’s firmware version is >= V1.8. you can download new firmware from our technical support forum: https://www.kincony.com/forum B. open controller’s IP, set…