it can work locally, without wifi connection. switch: – platform: gpio pin: GPIO2 name: “room lamp” id: lamp binary_sensor: – platform: gpio pin: GPIO36 name: “room lamp Toggle Button” on_press: then: – switch.toggle: lamp
esphome: name: kc868-a4 platform: ESP32 board: esp32dev # Enable logging logger: # Enable Home Assistant API api: wifi: ssid: “KinCony” password: “xxxxxxxx” captive_portal: web_server: port: 80 remote_receiver: pin: number: 23 inverted: True dump: all remote_transmitter: pin: number: 22 carrier_duty_percent: 50% switch: – platform: template name: “TV Power” turn_on_action: – remote_transmitter.transmit_nec: address: 0x00BD command: 0x807F repeat:…
This is ESPHome configure for KC868-Uair smart home automation box. example for use inside temperature sensor (DS18B20) and extend temperature sensor (SHT3x) and WS2812B RGB LED strip. esphome: name: kc868-uair platform: ESP32 board: esp32dev # Enable logging logger: # Enable Home Assistant API api: ota: password: “978e66f878ed5041b830cfb427393c79” wifi: ssid: “KinCony” # your wifi router…